Continuous dosing weighers
The material will be transported out of the hopper (option with level control) by
a linear dosing unit in two phases, rough- and fine dosing, into the weighing pan.
Then it will be emptied in batches to the conveying channel. The slightest deviation
from the set weight will be registrated immediately by the dosing processor
DPC3000 and compensated in the same weighing cycle.
The conveying channel equalizes the single discharges and guarantees a homogeneous
outlet. As conveying systems belts, vibration channels and vibration belts are at your
disposal. Especially for bad flowing materials we recommend the use of vibration belts.
CONTROLLER: Dosing Processor DPC3000
MATERIALS: Granulates, glass fibre, free flowing powder and bulk materials of any kind
STOCK: 30 litres or 60 litres rectangular hopper
CONVEYING SYSTEMS: Belts, vibration channels and vibration belts
CAPACITY 1): 0.5kg/h up to 2000 kg/h
OPTIONS: Customers specific adaptions
1) The capacity specifications depend on the material.
The throughput is based on material with a bulk density of 1 kg/dm3
The gravimetric dosing weigher for smallest quantities KDW 0.1 is a continuous
dosing system for granulates and free flowing powder.
The KDW 0.1 satisfies high quality requirements.
The throughput capacities are between 0.05kg/h up to 10kg/h with a convincing
accuracy up to 0.1%. This is based on the isolation of the weighing system
(the weighing system is decoupled from the hopper) and the high soluted electronic
weighing.
The closed housing is made of an aluminium profile frame with removable
macrolon windows. Therefore an easy access for the cleaning and maintenance work
is guaranteed. All parts which come into contact with the product are manufactured
of V2A (material no. 1.4301).
At the hopper and the material outlet installations for flange mountings are possible
to admit the whole system with over- or low pressure.
CONTROLLER: Dosing Processor DPC3000
MATERIALS:Granulates, free flowing powder and bulk materials
STOCK:2.5 litres round-shaped hopper
CONVEYING SYSTEMS:Belts, vibration channels and vibration belts
CAPACITY 1): 0.05kg/h up to 10kg/h
OPTIONS: Customers specific adaptions
DIMENSIONS: 660mm x 270mm x 590mm
WEIGHT: Approx. 25 kg
1) The capacity specifications depend on the material.
The throughput is based on material with a bulk density of 1 kg/dm3.
Dosing Weighers of the Series KDW
Gravimetric
dosing systems for granulates and free flowing powder
The gravimetric dosing weighers of the series KDW are new developed
continuous
dosing systems for
granulates, glass fibre and free flowing powder.
The throughput
capacities are between 0.5kg/h up to 2000kg/h with a convincing
accuracy up to 0.05%.
This is based on the isolation of the weighing system
(the weighing system is decoupled from the hopper) and the high soluted
electronic
weighing.
All KDW dosing systems are low-wear and almost maintenance-free. The parts
which
come into contact with the product are easy to clean. This fact is an
advantage if you
want to change the product. If requested, all parts which come into contact
with the
product will be manufactured of V2A (material no. 1.4301).
Continuous Gravimetric dosing systems Type KDW /MS
with 4 komponents and digital Master - Slave connection